Compact 12V 30A Power Supply Adapter for LED Strip, 3D Printer, LCD Monitor

This power adapter is designed to convert AC 110V/220V, 50/60Hz input voltage to a regulated DC 12V output with a maximum current of 30A and a maximum power of 360W. The output voltage can be adjusted by 15%, ranging from 10.2V to 13.8V.

The adapter features three sets of output channels, allowing it to deliver various current levels, such as 1A, 2.5A, 10A, 18A, 20A, or up to the maximum of 30A. For example, if your device requires 25A, the adapter will provide the full 25A. However, if the load exceeds 30A, the adapter will only supply 30A, and continued overloading may cause damage to the power supply.

To ensure efficient heat dissipation, the metal case of the adapter is designed with multiple ventilation holes. This power adapter is suitable for powering a wide range of devices, including LED strips, 3D printers, ham radio transceivers, audio amplifiers, wireless routers, and audio/video equipment. It is intended for indoor use only and should never be used outdoors.

The adapter is equipped with various safety features, including automatic overload cut-off, over-voltage cut-off, automatic thermal shutdown, and short-circuit protection. These features help ensure stable operation and prevent damage to the adapter or the connected devices. There are no significant voltage fluctuations when the power supply is turned on, during operation, or when it is turned off.

The fixing screw holes on the adapter have a diameter of 2.5mm (0.1 inch), allowing for secure mounting. The operating temperature range is -10°C to 50°C, and the storage temperature range is -20°C to 60°C. The ambient humidity range is 10% to 95%.

Please note that the power selector switch (110V/220V) is located inside the housing and must be set correctly before use to avoid damage. Additionally, the power cord is not included with the adapter, and it is essential to ensure that your device's voltage and wattage requirements are compatible with the adapter's specifications. The maximum recommended usage should not exceed 80% of the adapter's full load capacity, which is 288W.

product information: